How to connect ZeroWire Panel to your WiFi network.
Step 1. Turn on Wi Fi Discovery mode on the panel
installer code = (to be provided by the truSafe support team)
Step 2. Configure Wifi in Setting
On your mobile device such as smart phone, tablet or laptop, browse for WiFi networks and connect to "ZeroWire_xxxx" network.
Open your web browser (chrome, safari) and enter 192.168.1.3
The login section should appear.
Enter username and password as below
Username : installer (no capital letters)
Password : (to be provided by the truSafe support team)
Go to Menu > Settings
Select "Wifi Setup" from the drop down menu on the settings selector
Press "Scan For Wireless Networks"
Press the WiFi network name you wish to connect to. Enter WiFi password then press OK.
Network successfully selected will appear and your mobile device will be disconnected from the panel.
The panel will attempt to connect to the new wifi. After 3-5 minutes, try to login using Ultrasync+ app.
If you are unable to login to Ultrasync+ app nor establish a connection, contact our hotline at 1700817233 for more help.